 |
 |
heading |
 |
|
 |
|
ISO
BUTYL ALCOHOL |
(Iso- Butanol) |
As per GOST 9536-79 amndmnt 1-3 |
Index description |
Norm for grade ''S'' |
Appearance |
Transparent colorles liquid |
Color in Platinum- Cobalt scale, max. |
7 |
Density at 200C,g/cm3 min. |
0.801 - 0.803 |
Fraction of total mass of main substance, %,min. |
99.3 |
Fraction of total mass of acids in terms ofacetic acid,
%, max. |
0.003 |
Bromine vaule gmBr/ 100gm of butanol, max. |
0.02 |
|
Country of origin:
Russian Federation |
Shipment: in bulk. |
Min qty:
1000Mt. |
Shipment period: dispatch
from port within four to six weeks after receipt of payment
or tecnically and commercially clear letter of credit. |
Payment terms: 100%
abvance or irrevocable letter of credit at sight in favour
of our Co. based at Jebel Ali, Dubai, UAE. |
|
Cyclohexanone |
GOST 24615-81 |
Description |
Standard |
1. Mass portion of cyclohexanone, %. min |
99,8 |
2. Mass portion of impuritied, %, max |
0,1 |
3. Mass portion of water, % max |
0,1 |
|
Origin: CIS (Ukraine) |
Packing: ISO tanks/steel
barrels |
Transportation: 22
MT per ISO tank |
Port of loading:
Odessa (Ukraine) |
Application: organic
synthesis (adipic acid, e-caprolactam), as well
as a solvent for cellulose nitrate and acetate,
fats, natural resisns, polyvinylchloride, primary
dyes and other matters. |
|
SPECIFICATION
OF BETA NAPHTHOL |
Origin Ukraine |
|
Appearance |
Flakes |
Colour |
Light grey to grey |
Mass content summed up Naphthols counting
on 2 Naphthol 99.1% Min |
Mass comtent Of 1 - Naphthol - 0.03%
Max |
Melting Point 120.2 Deg C min |
|
ACETONITRILE |
Co-product in the production of acrylonitrile,
produced by ammonolysis of propylene, intended as
feedstock for organic synthesis, solvent of hydrocsrbon
oils. |
Technical requirements |
No. |
Property designation |
Value |
Test method |
1. |
Appearance |
transparent liquid without suspended
particles |
visual |
2. |
Acrylonitrile, ppm, not more than |
500 |
chomatographic sohajo ACEN-5 |
3. |
Hydrogen cyanide, ppm, not more than |
10 |
ACSA-CV |
4. |
Water, % wt, not more than |
0,15 |
ASTM 1364-87 |
5. |
Free ammonia,ppm, not more than |
5 |
CCSM TLB 22x |
6. |
Iron, ppm, not, more than |
0,2 |
DSA-1051-XI |
7. |
Copper,ppm, not more than |
0,2 |
DSA-1051-XVIII |
8. |
Colour, Pt-Co scle units, not more than |
5 |
ACSA-C-I |
9. |
Acetonitrile, % wt, not less than |
99,5 |
RL-LB-6 By difference* |
* 100 % minus the sum of
all determind impurities. |
|
ACRILONITRILE |
Technical requirements |
No. |
Property designation |
Value |
Test method |
1. |
|
Colorless, transparent liquid without
suspended particles |
VisualDSA 105 |
2. |
|
80 |
Chromatograph sohajo ACPN-1 |
3. |
Acetonitrile, ppm, not more than |
110 |
Sohajo ACPN-2 |
4. |
Acroleine, ppm, not more than |
5 |
Sohajo ACPN-3 |
5. |
Acidity, as acetic acid, ppm, not more than |
35 |
ASTM D 1613-96 |
6. |
Hydrogen cyanide, ppm, not more than |
5 |
ACSA C-VI |
7. |
Copper content, ppm, not higher than |
0,2 |
DSA-1051-XVIII |
8. |
Iron content, ppm, not higher than |
0,2 |
DSA-1051-XI |
9. |
Water, % wt, not more than |
0,4 |
ASTM D 1364-95 |
10. |
Perohides, ppm, not more than |
0,2 |
Sohajo ACPN-XVII |
11. |
Colour, Pt-Co scale units, not more than |
5 |
ACSA-C-I |
12. |
|
30-50 |
DSA-1051-XIX-A |
|
SODA
ASH LIGHT GRADE SPECFICATIONS |
Sr. No. |
Items |
Light Grade
Specns. |
1. |
Bulk Density 9/1. |
500-750 |
2. |
Volatile Matter in percent max. |
2 |
3. |
Sleve Analysis |
NA |
4. |
Total Alkalinity (as Na2CO3)%
by mass min. |
98.5 |
5. |
Matter insol in water % by mass max |
0.15 |
6. |
Sulphate (as Na2SO4) % By
mass max. |
0.08 |
7. |
Chloride 9AS NaCL) Percent by mass max |
1.00 |
8. |
Iron (as Fe) percent by Mass max. |
0.007 |
|
Vinjl
Acetate-Rectificate |
No. |
Description |
Superior |
1. |
Appearance |
liquid is similar to distilled
water in colour and transparency and includes no
suspended matters |
2. |
Density at 20G, g/cm |
0,932-0,936 |
3. |
Distillate volume at 71,8-73 G, %,min |
97 |
4. |
Mass fraction of acetaldehyde,%,max |
0,025 |
5. |
Mass fraction of main substance,%,min |
99,90 |
6. |
Mass fraction of croton aldehade,%,max |
None |
7. |
Mass fraction of acid(in terms of acetic acid),%,
max |
0,005 |
8. |
Mass fraction of divinyl acetylene,% , max |
0,0002 |
9. |
Mass fraction of water,%,max |
0,05 |
10. |
Mass fraction of polyvinyl acetate |
None |
11. |
Molar viscosity of polyvinl actste in benzena,
Pac(cp)min |
0,035 |
12. |
Molar viscosity of polyvinl actste at 150+1 C
on scale, max |
1 |
13. |
Mass fraction of iron,5,MAX |
0,00025 |
|
Origin: |
CIS (Russiaa) |
Packing: |
ISO tank |
Transportation: |
21.3MT per ISOtank |
Port if loadeing: |
Novovossiysk (Russia) |
|
SPECIFICATION |
STYRENE |
(GOST 10003-90) |
No. |
|
Grades 1) CDEB |
Grades 2) SDMFC |
1. |
Appearance |
Transparent homogeneous
liquid without mechanical impurities and undissolved
moisture |
2. |
Styrene content,wt %, min |
99,80 |
99,80 |
3. |
Phenylacetylene content, wt % max |
0,01 |
- |
4. |
Methylethylacrole in content, wt %, max |
- |
0,006 |
5. |
Divinyl benzene content, wt %, max |
0,0005 |
- |
6. |
Acetophenoze content, wt %,max |
- |
0,006 |
7. |
Carbonyl compounds (asbenzaldehyde) content, wt,
%, max |
0,01 |
0,01 |
8. |
Peroxide compounds ( converted to s active oxgen),
wt, %, max |
0,005 |
0,005 |
9. |
Polymer content, wt, %, max |
0,001 |
0,001 |
10. |
Color, platinum-cobalt scale, Hazen, max |
10 |
10 |
11. |
Stabilizer (para-tert-butylpyrocatechol) content,
wt, % |
0,0005-0,0010 |
0,0005-0,0010 |
|
CRUDE
IODINE |
Type: Ch |
Technical specification: |
Appearance |
Gray-Violet crystal/prills |
Main substance |
Assay 99.5% |
Nonvolatile matter |
0.03 % max. |
Chlorine & bromine (as CI) |
0.010 % max. |
Sulphate |
0.010 % max |
Plumbum (Pb) |
1.0mg / kg |
iron (Fe) |
15.0 mg / kg |
Strntium |
7.0 mg / kg |
Copper(Cu) |
1.0 mg / kg |
zinc (Zn) |
5.0 mg / kg |
Arsenic (As) |
0.2 mg / kg |
Hydragyrum (Hg) |
0.005 mg / kg |
Packing: Cellophane
covered iodine is packed in the carddoard wrapped
drum according to the international packing standard. |
|
SPECIFICATION
OF DI OCTYL RHALAGE |
Color APHA |
Max 20 |
Specific Gravity 20/20C |
0.986(+)(-)3 |
Acid Value KOH mg/g |
Max 0.02 |
Estre Value |
287(+)(-)3 |
Refroctive Index
Nd20 25C |
1.485(+)(-)0.003 |
Heat Loss |
Max0.07 |
Volume Resistivity 30 C |
Min 4.0 x 10 times 11 |
|
|
BLUE
ACETATE |
1. |
n-Butyl Acetate |
99.2 percent by weight, minimum |
1B-ES-01 |
2. |
Relative density |
0.880 to 0.883 at 20/20oC
This is equivalent to a density of 0.878 to 0.881
g/ml at 20oC |
1B-ES-02 |
3. |
Water |
0.03 per cent by weight, medium |
1B-ES-03 |
4. |
Acidity |
0.005 per cent by weight, medium |
1B-ES-04 |
5. |
n-Butanol |
0.5 per cent by weight, medium |
1B-ES-01 |
6. |
Apperance |
clear liquid, free from suspended matter |
1B-ES-05 |
7. |
Colour |
10 platinum/cobalt, maximum |
1B-ES-06 |
The product meets also the following
which will not determined on a routine basis is
guaranteed by process control. |
8. |
Residue on evaporation |
0.002 per cent by weight, maximum |
1B-ES-07 |
9. |
Distallation
(101.31.pa) |
|
|
|
- Initial boiling point
- Dry point
|
- 124.0oC, minimum
- 128.0oC, maximum
|
|
|
|
BUTYL
ALCOHOL |
(N-Butanol) |
Index description |
Norm for grade "S" |
Apperance |
Transparent colorles liquid |
Color in Platinum - Cobalt scale, max |
10 |
Density at 20oC, g/cm3 min |
0.809 - 0.811 |
Fraction of total mass of main substance, %min |
99.4 |
Fraction of total mass of acids in terms of acetic
acid, %max |
0.003 |
Bromine value gmBR/ 100gm of butanol, max |
0.02 |
Fraction of total mass of nonvolatile matter,
%max |
0.0025 |
Mass cibtebt if carbonil compounds in terms of
oil aldehyde, %max |
0.06 |
Fraction of total mass of moisture, % max |
0.08 |
Content of origin |
Russian Federation |
Shipment |
in bulk |
Min qty |
100Mt. |
Shipment period |
dispatch from port within four to six weeks
after receipt of payment or technically and
commercially clear letter of credit |
Payment terms |
100% advance or irrevocable letter of credit
at sigth in favour of our Co. based at Jebel
Ali, Dubai, UAE |
|
|
EXXONMOBIL |
Customer Product Specifications |
Tol-sol |
Solvent TOLUENE SPECIFICATION |
DATED: July 01,2003 |
PROPERTIES |
TEST METHOD |
SPECIFICATION |
Distillation Range |
ASTM D 850 |
1.0oC max. Including 110.6oC |
Appearance (@18-25 Deg C) |
Visual |
Bright & Clean, No residus |
Total Non Aromatics |
ASTM D 2360 modified |
1.5 wt% max. |
Color Pt-Cobalt |
ASTM D 1209 |
20 max. |
Copper Corrosion |
ASTM D 849 |
1 max. |
Density (@15oC) |
ASTM D 4052 |
0.869-0.873 |
Nonvolatile Residue |
ASTM D 1353 |
|
Acid Wash Color |
ASTM D 848 |
2 max. |
Benzene |
ASTM D 2360 modified |
0.1 wtO%max. |
"ASTM and UOP test
methods indicated are subject to (i) modification
by SELLER or (ii) may be performed in a manner
other than strictly provided by ASTM or UOP,
as applicable, which, in SELLWR's judgement,
incorporates improvements or modifications
consistent with current industry practice,
or (iii) alternative ASTM test methods to
the methods listed may be substifuted in place
of stated methods. Applicable sampling and
testing methods are subject to change without
notice and are available for review on request." |
|
SPECIFICATION
OF |
NAPHTHALENE
- REFINED |
Grade OB: As per GOST 16106-82 |
Property |
Norm |
Appearance |
in Flakes |
Colour |
White light yellow or light rose |
|
Coloration is permissible |
Crystallization temperature o
C Min |
79.6 |
Mass content of ash%Max |
0.01 |
|
|
TECHNICAL
SPECFICATIONS |
TEHNICAL
NAPHTHALENE |
|
Property |
Unit |
limit value |
Method |
Crystallization point |
oC |
Min. 78.5 |
STPTC N2/79 BS 5962/80 (1993) ASTM D 1493-97 |
Ashos |
% |
Max. 0.05 |
ASTM D 482-95 STPTC CO 7/79BS 5962-80(1993) |
Non volatile material |
% |
Max. 0.10 |
ASTM D 2232-81 BS 5962-80 STPTC N 6-79 |
Toluene insolubles |
% |
Max. 0.15 |
STPTC N 5/79 BS 144-97 |
Sulphur |
% |
Max. 0.60 |
ASTM D 5453-93 ASTM D 4629-96 ASTM D 5176-91 |
Water |
% |
Max. 0.1 |
ASTM D 95-83 (90)STPTC N 1/79 |
|
SPECIFICATION
OF ETHYL ACETATE |
Name |
Ethyl Acetate |
Classification |
Ester |
Synonyme |
Acetic Acid, Ethyloster Acetic Ether, Acetoxyethame |
Formula |
C4H8O2 |
Molecular |
88 |
Shipping Name |
Ethyl Acetate |
Code/Label |
Flammable Liquid, Class 3 |
Hazardous Waste ID No |
5 |
U N No |
1173 |
Chemical Identity |
|
Description |
Clear, Colourless |
Odour |
Characteristic |
Solubility |
Freely Soluble in alcohol and acetone |
Relative on Evaporation % by mass (Max) |
0.01 |
Acidity( as Acetic Acid) % by mass (Max) |
0.01 |
Ester content ( as Ethyl Acetate ) % by
mass (Min) |
99.8% |
Distillation Range |
|
(a) Initial boiling Point at 760 mm Hg(Min) |
76.0oC |
(b) Dry Point at 760 mm Hg(max) |
78.5oC |
Water content % by mass (Max) |
0.03 |
Packing: Ethyl
Acetate is packedin New 180kgs M.S. Barrels |
Applications:
|
Printing Inks |
Paints and coatings |
Laminates |
Fexible Packaging |
Aluminium Foil |
Pesticides |
Pharmaceuticals |
|
Acetic
Acid |
GOST 19814-74 |
Description |
Standard |
1. Appearance and colour |
colorless, clear liquid without mechanical
impurities |
2. Solubility in water |
fully soluble, solution is clear |
3. Mass portion of acetic acid,%,not less
than |
99,5 |
4. Mass portion of acetic aldehyde,%,not
more than |
0,004 |
5. Mass portion of formic acid,%, not more
than |
0,05 |
6. Sulfate (SO4)3,%,
not more than |
0,0003 |
7. Chloride (Cl) mass portion,%,not more
than |
0,0004 |
8. Heavy metals mass portion precipitable
ith hydrogen sulfide (Pb),%,not more than |
0,004 |
9. Mass portion of iron (Fe),%, not more
than |
0,0004 |
10. Nonvolatile residue mass portion,%,
not more than |
0,004 |
11. Stability of potassium permanganate
solution colour, min, not more than |
60 |
12. Mass portion of the substances oxidized
by potassium bichromate, cm of sodium thiosulfate
solution of concentration with (Na2SO3*5H2O)
=0,1 mol/dm3(0,1h), not more than |
5,0 |
|
Origin: |
CIS (Ukrame) |
Packing: |
ISO tanks |
Transportation: |
24 MT per ISO tank |
Port of loading: |
Odessa (Ukraine) |
|
Methonal-95 |
|
DONOMINATION OF
PROPERTISE |
NORM FOR MARK
A |
1. Appearance |
Colour Transparent Liquid Without Insoluble
Admixtures |
2. Density 20/4 g/sm sq |
0.791-0.792 |
3. Mscibility with Water |
Mixs up with Water without traces of Tubidity
and Opalescence |
4. Temperture Limits |
|
a) A limit of boiling, degrees C |
64. 0 - 85.5 |
b) 99% of the product is overtaken in limits,
degrees C no more than, % |
0.8 |
5. Mass content of water, no more, % |
0.10% |
6. Mass content of free acids converted
to ant pussycat, %, no more than |
0.0015 |
7. Mass content of aldehydes and ketons
in ecalculation on acetone %, no more than |
0.003 |
8. Mass content of flying connections of
iron converted to iron, %,no more than |
0.00001 |
9. Test with permangate kally min not more
than |
60 |
10. Mass content of ammonia and amino compounds
converted to ammonia, %, no more than |
0.00001 |
11. Mass content of chlorine,%,no more than |
0.0001 |
12. Mass content of sulphur, %, no more
than |
0.0001 |
13. Mass content of the non-volatile residue
after evaporation,%,no more than |
0.001 |
14. Specific conductivity the Ohm in (-1)
sm in (-1) |
3 x 10 |
15. Mass content 2tanona, % no more than |
0.01 |
16. Chromaticity on a platino-cobalt scale
of unit hazen, no more than |
5 |
|
METHYL
ISOBUTYL KETONE |
|
|
|
Methyl Isobutyl Ketone, a colourless
liquid with a mild odour, is only slightly
miscible with water but completely miscible
with the usual paint and laequer solvents.
It is an excellent solvent for a wide variety
of natural and synthetic resins. In view of
the rising demand for MIBK
and to cope with the development of petrochmicals
and specialty chemicals. YCIC has introduced
the patented manufacturing technology from
Deutsehs Texaco of West Germany to produce
M I B K from propylene to
meet both the domestic and overseas market
demands. |
SPECIFICATIONS:
(ASTM D 1153) |
1. Purity wt % |
|
: 99.0min |
2. Colour Pt-Co (Hazen) |
ASTM D 1364 |
: 15APHAmax |
3. Water wt % |
ASTM D 1364 |
: 0.1 max |
4. Sp. Gr. at 20/20oC |
ASTM D 268 |
: 0.800-0.803 |
5. Distillation Range oC |
ASTM D 1078 |
: 114-117 |
6. Acidity wt % ( As Acetic Acid ) |
ASTM D 1613 |
: 0.01 max |
PHYSICAL
PROPERTIES: |
1. Molecular Weight |
: 100.16 |
2. Boiling Point oC |
: 116.2 |
3. Freezing Point C |
: -84 |
4. Flash Point C |
: 74 |
5. Evaporation rate ( o-buty
acelale=1) |
: 1.4 |
6. Water Miscibility |
: 2.04 |
7. Explosive Limits ( Vol.%
in air ) |
: 1.4-7.5 |
8. refractive Index No
C |
: 1.3958 |
9. Specific Heat Cal/g. oC |
: 0.459 |
10. Viscosity cps st 20oC |
: 0.6 |
|
METHYLENE
CHLORIDE |
Appearance |
SGS SPI 402-2 |
|
Clear and free from suspended matter |
colour PtCo |
ASTM D 2108 |
|
<5 |
Nonvolatile matter, Method B |
ASTM D 2109 |
mg/kg |
<10 |
Water, Method A |
ASTM D 3401 |
ppm |
21 |
Acidity as HCI, procedure B
|
ASTM D 2989 |
ppm |
0.6 |
Free Halogens |
ASTM D 4755 |
|
Negative |
Composition by GC |
SGSSPI 016-1 |
|
|
|
Purity |
SGSSPI 016-1 |
wt% |
99.99 |
|
Amylene |
SGSSPI 016-1 |
mg/kg |
55 |
|
Other Chlorinated Hydrocarbons |
SGSSPI 016-1 |
mg/kg |
35 |
Density at 15oC |
ASTM D 4052 |
kg/L |
1.3348 |
|
PHENOL |
WE HERE WITH CERTIFY THE FOLLOWINGS
SPECIFICATIONS. |
|
CHARACTERISTICS |
UNIT |
LIMINTS |
TEST METHODS |
RESULTS |
A) PURITY |
wt PERCENT |
Min.99.9 |
100WT PCT-GC impurliy WT PCT-HOWT PCT |
99.96 |
B) SOLIDIFICATION |
|
Min.40.7 |
ASTM D -1493 |
40.8 |
C) |
wt PERCENT |
Max.0.007 |
ASTM E -411 |
0.003 |
D) MESITYLOXIDE |
wt PERCENT |
Max.0.005 |
MV-71 |
0.0001 |
E) WATER |
wt PERCENT |
Max.0.05 |
ASTM D-1631 |
0.02 |
F) COLOUR |
|
Max.10 |
ASTM D-1209 |
5 |
G) APPEARANCE |
|
CLEAR |
VISUAL |
CLEAR |
|
SPECIFICATIONS
OF PHENOL (CUMENE BASED) |
Property |
Norm |
Appearance |
White Crystal |
Crystalization point, Min |
40.6oCentrigrade |
Content of ( in dry Substance): |
|
|
Phenol |
99.0%min |
|
Non volatile |
0.008%max |
Moisture content |
No norms |
Optical density of water solution
of Phenol (8 gm) under 20 C, max |
0.03 |
Optical density sulphurised
Phenol, max |
No norm |
Colour of melted phenol at manufacturer,
Hazen |
No norm |
Colour of melted phenol at buyer's
place,Hazen |
No norm |
Mass content of Total Organic
admixtures,% Max |
No norm |
Mass content of Organic admixtures,%Max |
|
Meziethyl Oxide |
0.004 |
Sum total of alphamethylstirol
and Isopropylbenzol |
0.01 |
|
SPECIFICATION
OF ANILINE OIL IN ISO TANK. |
ORIGIN
; Czech Republic. |
|
Chraracteristic |
Unit |
Value |
Lower Limit |
Upper Limit |
Aniline Oil |
%wt |
99.94 |
99.90 |
|
Cyclohexylamine |
%wt |
0.000 |
|
0.010 |
Cyclohexanol |
%wt |
0.001 |
|
0.010 |
Nitrobenzene |
%wt |
0.00020 |
|
0.00050 |
Water |
%wt |
0.05 |
|
0.10 |
Hydrocarbons(C6) |
%wt |
<0.002 |
|
0.002 |
Colour |
Hazen |
<100 |
|
100 |
Crystallization Point |
oC |
>-6.3 |
-6.3 |
|
|
Caustic
Soda Flakes (Refined) |
No. |
Description |
Standard TR |
1. |
Appearance |
White flakes, light colour allowed |
2. |
Caustic soda content, min, % by mass |
98.5 |
3. |
Sodium carbonate, no more than,% by mass |
0.8 |
4. |
Sodium Chloride, no more than, % by mass |
0.05 |
5. |
Iron content as per Fe 203, max, % by mass |
0.004 |
6. |
Sum of mass fraction of iron and aluminum
oxides, %,no more than |
0.02 |
7. |
Mass fraction of silicic acid recalculated
to SiO2,%,no more than |
0.02 |
8. |
Mass fraction of Sodium sulfate,% no more
than |
0.03 |
9. |
Mass fraction of calcium & magnesium
recalculated to calcium, %, no more than |
0.01 |
10. |
Mass fraction of sodium chlorate,%,no more
than |
0.01 |
11. |
Sum of mass fraction of heavy metals precipitated
by H2S recalculated to Pb,%,no more than |
0.01 |
12. |
Mass fraction of mercury, %, no more than |
0.0005 |
|
Origin: |
CIS (Russia) |
Packing: |
50 kg x PE bags |
Transportation: |
25 MT per 40fcl |
Port of delivery: |
Novorossiysk |
Application: |
chemical, petrochemical, cellulose and paper
industries |
|
SPECIFICATION
OF CAUSTIC SODA LIQUID |
( diaphragm
grade ) |
Tests |
Specification |
Sodium Hydroxide(Net) |
Wt%/ 49.0~51.0 Min./49.5`50.1 |
Sodium Carbondare, |
Wt%/0.2Max/0.1 |
Sodium Chloride |
Wt%/1.1.Max?0.95 |
Iron |
PPM/20 Max/10~15 |
Sodium Sulfate |
Wt%/0.025 Max/0.015 |
|
SPECIFICATION
OF CAUSTIC SODA LYE |
PURITY |
UNITS |
QUANTITY |
NaOH |
Wt% |
48.5 Min |
Na2CO3 |
Wt% |
0.4 Max |
NaCl |
Wt.ppm |
20 Max |
Na2SO4 |
Wt.ppm |
15 Max |
Al203 |
Wt.ppm |
10 Max |
Fe203 |
Wt.ppm |
6 Max |
SiO2 |
Wt.ppm |
5 Max |
CaO |
Wt.ppm |
10 Max |
Sp.Gr.@ |
-- |
1.515 Min |
15.6 Deg C |
|
1.520 Max |
|
SPECIFICATION
OF DENATURED HYDRATED ETHYL ALCOHOL |
TESTS |
RESULTS |
SPECIFIC |
ALCOHOL STRENGTH AT 20o C VOL
% |
95.41 |
95.1MIN |
WATER |
|
MAX |
ALCOHOL STRENGHT AT 20oC W/W% |
|
MIN |
TOTAL ACIDITY (AS ACETIC ACID) |
|
MAX |
ELECTRICAL CONDUCTIVITY u/Sm |
|
MAX |
ASPECT |
CLEAR |
CLEAR |
COLOR |
COLORLESS |
COLORLESS |
|
SPECIFICATION
OF ONDUSTRIAL PHOSPHORIC ACID |
Tests |
Specification |
H3 PO4 |
65%Min |
SO 4 |
0.5%Max |
Fe( total) |
Less than 0.2% |
CL |
Less than 0.1% |
F |
Less than 2% |
AL 0 |
0.01% |
Density in 60 F |
More than 1.47 |
Cao |
Less than 0.1% |
Suspended soilds |
Less than 0.1% |
|
|
|
|
|
 |
|
 |
|
|